Fulltext search in archive

This article focuses on the development possibilities of the venison market in the Czech Republic. The main factors affecting the primary game market were investigated, both production limitations on the side of the hunters and on the side of the game production purchase prices. These factors were analysed in the context of the consumer prices of general meat production and the purchase prices of common meat (beef, pork). Furthermore, the size of the total game market was estimated, taking into account the export and import of this commodity. The potential venison market size for the Czech Republic was also established in the study. The gap between the development of the market consumer prices and purchase prices of the venison was analysed. The conducted research further revealed that the respondents do not perceive a relationship between the production of venison and the protection of forest ecosystems. With few exceptions, they do not realise that by buying and consuming venison, they can contribute to the support of forestry. Furthermore, the perception of the role of the forest environment in relation to game meat by the public does not correspond to the need to regulate the game density to limit damage to forest stands. The results of this research are recommendations which mainly consist in expanding the offer of the primary production to products significantly closer to the consumer market (moving from a producer market to a consumer market), and the implementation of activation campaigns (tastings, presentations of opinion makers). At the same time, our work revealed the need for further development, and by increasing the value for the customer who, with the appropriate marketing strategy, can perceive this product as a premium organic food through which they contribute to sustainable forest management.

Land abandonment and the emergence of new forest areas create novel dynamics for forest ecosystems and landscapes. Modelling is often used to forecast tree species composition, age group distribution and spatial patterns in the future. The aim of this study was to develop three scenarios for changes in tree species composition, stand age distribution and spatial patterns of new forest areas and permanent forests using Latvia as a case study. We selected 19 study areas of the size 10 km × 10 km to sample the variety of forest cover patterns, tree species, and stand age. Using GIS tools, we developed three scenarios: baseline, commercial and conservation. Results showed that the conservation scenario resulted in the most even-aged group distribution. Scenarios predicted the increase of Picea abies area (reaching 29.3% in permanent forests and even 45.7% in new forests) and the reduction of Pinus sylvestris in most cases. Changes in the median patch area were the best indicator for evaluation of different scenarios with the largest patches of new forest areas for the conservation scenario (1.92 ± 1.23 ha). The existing structural and compositional integrity of sampled forest landscapes was best retained under the baseline and conservation scenarios, while the commercial scenario indicated more fragmented forest landscapes in the future.

This review article summarises the results of research on forest liming, fertilisation, nutrition flows and cycles in selected European and other countries. The presented studies mostly deal with assessing the effect of liming and fertilisation applied during planting or shortly after planting. The sporadic studies on fertilisation in older stands are also presented. The application of crushed limestone, dolomite or other alkaline rocks or their mixtures is usually used to improve the soil conditions on a large area through the adjustment of soil acidity and to supply any deficient elements, especially calcium and magnesium. These amendments are typically used on naturally nutrient-poor soils or as a curative technique to neutralise the soil chemistry affected by anthropogenic acidification. Artificial fertilisers are usually applied on small spots to individual trees on the surface of the soil shortly after planting or into a planting hole during planting. The purpose is to give some initial support to young trees to better overcome the post-planting shock and to accelerate the height growth. Less frequently, artificial fertilisers are used on large areas of forest stands for the purpose of increasing stem growth. The methods and the extent of forest fertilisation substantially vary in individual countries and different time periods.

In Central Europe, the most important pioneer species are silver birch and European aspen. Changes in disturbance regime and an economic interest for this species have led to studies on this species and stands. Two naturally regenerated dense stands of birch (Betula pendula Roth – silver birch monoculture) and aspen (Populus tremula L. – European aspen monoculture) were selected from a Querceto – Fagetum mesotrophicum site to observe responses under the same conditions in Central Europe. Both stands regenerated after the allochthonous Norway spruce stands dieback at the site in 1999. Within a 10 m × 25 m transect established in both stands, the diameter at breast height (DBH) of all the trees was measured between 2015 and 2020. In addition, the height and position were recorded for all trees, and sample trees of both species were felled for biomass measurement. A higher volume production of aspen at the beginning (107.48/96.80 m³) and at the end of the experiment (178.32/143.08 m³) was accompanied with a lower above-ground wood biomass (WAB). The WAB of birch increased from 81.9 t·ha^–1 to 103.3 t·ha^–1 and aspen allocated 79.5 t·ha^–1 to 94.8 t·ha^–1 of biomass. The current annual increment of biomass for these stands was 4.3 t·ha^–1 and 3.1 t·ha^–1 in the age range of 17 to 22 years. The culmination of the volume increment has not yet occurred in any of the stands, but the mean annual increment of wood biomass has already been reached for both stands. Furthermore, the aspen stand tended to be more dynamic in terms of biomass allocation and mortality. Also, the lower self-tolerance of aspen confirmed our hypothesis: the two native pioneer species differ in their social behaviour within monospecific stands.

The European Union (EU) provides both financial and expert support for sustainable forest management initiatives and also boosts compliance with such initiatives in Africa. Thus, there is a need to monitor the progress of implementing such initiatives. The objective of this paper is to describe the role of timber harvesting entities in environmental impact discussions, and to also identify the role of EU institutions in promoting forest sustainability in Sierra Leone. Data were collected in a controlled survey from four communities, using a questionnaire formulated according to guidelines recommended by Babbie and Mouton (2010). The reliability test shows a 0.68 internal consistency among the latent variables (Cronbach alpha test). The selected four communities were Bambawo, Dia, Basara, and Menima, with a population of 6 000, 5 400, 7 500, and 5 600 inhabitants, respectively (Stats SL 2021). A Confirmatory Factor Assessment (CFA) was used for a descriptive statistical analysis of the data. The results showed that the environmental impact has an eigenvalue of 1.08, where only variables with a factor loading exceeding 0.5 were used. The paper concludes with discussions and relevant recommendations on mitigating the impacts of timber harvesting on the environment within the study area.

This paper examines changes in soil physical and chemical properties in relation to tree proximity on different slopes. Topsoil and subsoil were sampled at 12 research plots on four slope types, the soil pits being placed at the base of a tree (near tree, NT) and between the test tree and an adjacent tree (between trees, BT). We observed a significant decrease in vertical topsoil response to slope on lower, middle and upper slopes, and a decrease in fine roots (R < 2 mm) on flat ground. Overall, middle and lower slopes showed the highest similarity, and upper slopes and flat ground the least, with the greatest subsoil changes observed mainly on middle slopes and least on lower slopes. There was clear topographic dependence between subsoil water stable aggregates (WSA) and C dynamics, with BT total carbon (Ctot) higher on flat ground and lower on middle slopes; unlike topsoil, where the strongest WSA correlation was with distance from the tree. The highest N : OM (organic matter) ratios occurred on middle slopes facing north-west, and lowest on lower slopes facing north and flat ground. Our findings confirm the influence of slope type on soil characteristics, with NT soil supporting soil formation by transporting water to deeper layers, especially on slopes > 5°. These observations contribute to a better understanding of the dependence of soil properties on slope type and tree position when planning sustainable forest management.

In recent decades, the interest in searching for procedures and strategies to make energetic and economic use of residues from different industries has been an important part of the political agenda. There are several methods to determine the volume of residues from the forestry industry, but they are too time-consuming to apply. The objective of the present study was to establish a simpler and more efficient method to quantify the volume of residues from the forest industry. Ten controlled piles were made with residues from a private sawmill in the city of Durango, Mexico. To calculate the volume, two manual methods and one automatic method were used to calculate the stacking coefficient of the piles, while the water immersion method was used to calculate the real volume. A completely random experimental design was used for the analysis, where an analysis of variance and mean comparisons were performed at a significance level of P ≤ 0.05. The results of the study show that the threshold segmentation method is faster, more practical and efficient than the other methods used. The estimation of the volume of these residues will contribute to generating sustainable alternatives for the development and use of forest industry resources.

Due to an increasing risk of further damage to forests, forest managers are considering introducing an alternative direction for their future development – via the cultivation of mixed forests. At middle altitudes in the Czech Republic, an oak-beech-linden stand is the most natural type, and we tried to answer three main questions: (i) How the various thinning types affect dendrometric parameters and quality of the stand; (ii) How long thinning works on this stand until it loses its effect; (iii) How the stand develops spontaneously after abandonment. This experiment was conducted at the Training Forest Enterprise in the Czech Republic in Drahanská vrchovina (highlands in central Moravia). In 1988, four plots were established in a 49-year-old stand where, in three of the plots, different types of thinning (crown, low and heavy crown) were performed, leaving one (reference plot) to develop naturally. The height, the height of the crown base and diameter at breast height (DBH) were measured, and the shape and quality of the trunk and crown were estimated on each tree. Measurements were carried out in 1989, 1994, 1999, 2005, 2010, 2015, and 2020. In the first 10 years, the DBH and height of the crown base did not show any differences, and the linden at the heavy crown plot outgrew the linden trees at the other plots in height. After these 10 years, the thickest linden, the tallest beech and linden, and the greatest height of the crown base of beech and linden were all found at the heavy crown plot. The shape and quality of the trunks and crowns of beech, oak and linden were similar in all plots (including the reference plot) during the entire experiment. After thinning, the plots were left to grow spontaneously. The heavy crown thinning removed a greater number of thicker trees at the middle level, thus supporting the trees growing in the lower part of the middle level and in the below level (i.e. the beech and linden). These trees then grew more quickly compared to the others, but their quality decreased, as did that of the others. Therefore, a forest left to grow and develop spontaneously is practically unusable for commercial purposes.

The rate of climate change advancement and its predicted impact are valid reasons for intense discourse on the topic of choosing the most suitable silvicultural and adaptation measures for the longevity and sustainability of forest communities. Changes in growth conditions of plants can be expected in both vertical (altitudinal) and horizontal (geographical) directions. The anticipated occurrence rate of these changes should, according to climate models, be higher than the natural adaptability rate of longevous tree species. This study focuses on the possibility of utilising regional geographical units of the Czech Republic (Central Europe) – Natural Forest Areas (NFAs) – for introducing the principles of assisted forest migration to national silviculture policies in order to find solutions for the predicted climate change scenarios. The primary objectives are (i) to review the history of the NFA concept, (ii) to discuss the perspectives of NFAs with regard to climate change, and (iii) to propose possible solutions for further development in comparison with alternative approaches to horizontal classification of the Czech Republic. This study is the first of its kind that provides a complete textual and graphic overview of the NFAs' history from 1959 to 2018, highlighting the purpose of NFAs as both frameworks for the maintenance of the genetic potential of forest tree species' populations and frameworks for long-term strategic management planning. Further development of the concept is discussed in connection with the main principles of assisted forest migration and the possibility of employing geospatial modellation analyses for a more precise definition of current NFA borders. An assessment of the areas' potential is also debated, mainly with an emphasis on the zonality of forest sites.

In Czechia, harvesters contributed 43% of the total annual timber production in 2022. It is assumed that harvester technology will continue to be used intensively in the future, even though there is a change in the tree species composition of forests after the recent bark beetle outbreak and an increase in the use of close-to-nature forest management. The aim of this study was to analyse the over- and under-bark volume estimates of European larch timber produced by a harvester in Czechia. This study used the M3s price category for volume estimation. This volume was compared with the M3toDE price category. The M3toDE price category underestimated the over-bark volume by 5.59% compared to the M3s price category. However, for use in forestry practice in Czechia it is currently necessary to use the M3toDE price category. Therefore, the M3toDE price category was used to compare under-bark volumes according to different bark deduction methods. Differences were found between all the five methods investigated. Understanding this sub-issue will help in training operators, acquiring comprehensive knowledge about the functioning of harvester software and maximising the economic effect of the sale of larch timber.

This study focused on the hydrophysical characteristics of an abandoned limestone quarry in Czechia. Six sites were examined; two sites were undergoing natural succession (the Quarry Wall and Reed Canary Grass plots, which had undeveloped arboreal layers) and four sites were undergoing managed forest reclamation. Of the four forest reclamation sites, three were classified as prospering (the Prospering Lime, Prospering Maple and Prospering Lime + Oatgrass plots) and one was in decline (the Declining Larch + Lime plot). The arboreal layer included small-leaved lime (Tilia cordata Mill.), sycamore maple (Acer pseudoplatanus L.), and European larch (Larix decidua Mill.). Our results showed that Lime + Oatgrass plot retained more water than other plots. Field soil moisture measurements indicated that throughout the 1096-day monitoring period, only the soils at the successional sites reached the wilting point (Quarry Wall plot: 159 days; Reed Canary Grass plot: 43 days). Soil heterogeneity in the reclaimed areas was due to variation in the soil profile depth, disturbance from mining activities, reclamation efforts, and the availability of quality soil material. Soil conditions and the dynamics at the quarry created less than ideal conditions for tree regeneration. This primarily relates to limiting and significantly heterogeneous successional plots.

Mediterranean Quercus forests have great ecological importance but face numerous threats, including pests. The spongy moth, Lymantria dispar L., is a major oak defoliator across its geographical range and has a natural enemy complex that may control its population dynamics. This study aimed to investigate candidate predators (Coleoptera: Carabidae) and parasitoids (Hymenoptera: Encyrtidae, Ichneumonidae, Pteromalidae, Braconidae, Bethylidae, Ceraphronidae, Eulophidae, Eupelmidae and Trichogrammatidae; and Diptera: Tachinidae), for the control of L. dispar in two areas in Andalusia (Spain). We studied 10 Quercus stands (Q. suber, Q. ilex, and Q. pyrenaica), with different L. dispar infestation level. Insects were collected using pitfall and cross-vane traps, during the defoliator's larval period. Four genera comprised 92.2% of all the Carabidae predators found: Steropus Dejean (34.1%), Carabus L. (28.4%), Calathus Bonelli (15.9%), and Platyderus Stephens (13.8%); and four Hymenoptera families comprised 93.7% of the parasitoid specimens collected: Encyrtidae (61%), Ichneumonidae (17.5%), Pteromalidae (10.7%), and Braconidae (4.5%). Both the natural enemy assemblage composition and the abundance per tree varied between geographical areas, as well as between levels of defoliator infestation. The candidate enemy complex was markedly diverse and abundant in stands not infested by L. dispar, where no insecticides had been applied. Our results suggest the importance of generalist predators as natural enemies of L. dispar.

The year 2018 was distinguished by a warm summer with extended periods of low or no precipitation. In this context, we investigated the intra-annual dynamics of xylem differentiation phases and quantitative vessel anatomy to analyse the age effect on the xylem formation response of younger (50 years) and older (135 years) mature European beech trees under summer drought conditions. The xylem formation dynamics of young and old trees were performed on microcores collected at weekly intervals in the Rájec-Němčice ecological station in the South Moravia region (Czech Republic). The onset of xylem formation was found identical in both age trees, and most of the trees ceased their enlargement by the end of July, which is attributed to the harsh environmental conditions of this month. Young trees were characterised by a 10-day extended enlargement period and a higher growth rate, resulting in more vessels and a wider tree-ring width. No significant linkage was found between intra-annual environmental conditions of the 2018 year or age effect and the vessel anatomy traits.

We compared the biological and economic effects of simultaneous artificial regeneration of mixtures of pioneers (birch – Betula pendula Roth or aspen – Populus tremula L.) and beech (Fagus sylvatica L.) with plots of monospecific beech. During the period of two years, the height of young beech trees, their mortality, and the regeneration cost were analysed in the following treatments: monospecific beech (9 000 pcs·ha⁻¹), monospecific beech (5 000 pcs·ha⁻¹), beech/birch (5 000/2 500 pcs·ha⁻¹) and beech/aspen (5 000/2 500 pcs·ha⁻¹). Four plots (differing in soil and altitude) were established in the region of the Czech Republic in autumn 2021. The positive biological effect of these pioneers was detected only in the treatments where the initial planting stock of the pioneers was substantially higher than in that of beech (on average 39 cm vs. 100 cm, respectively). However, the expenses of simultaneous regeneration were about 15% lower compared to plots with monospecific beech in densities like 9 000 pcs·ha⁻¹, and around 35% higher than in the monospecific beech plots with a density of 5 000 pcs·ha⁻¹.

Eucalyptus plantations are an important source of raw materials for the Thai forest products industry. Despite its economic value, only a few noncomprehensive papers have been published about the wood properties and fungal susceptibility of eucalyptus. Our study covered the most commonly used commercial eucalyptus clones with a wide variety of sizes from eastern Thailand. We assumed that the properties of the clones would differ based on the tree sizes. The objectives of this study were to determine the effects of diameter at breast height (DBH), size, and clone type on wood properties and mould susceptibility. The optimal usage of each log characteristic based on the log quality and properties could be used to determine the maximum payoff. The wood properties and log characteristics of five eucalyptus log classes with three clones were investigated. In general, the levels of means and standard deviations were as follows: the modulus of rupture (MOR) was between 39 ± 4.9 MPa and 66 ± 5.4 MPa, and the modulus of elasticity (MOE) was between 14.5 ± 9.7 GPa and 24.0 ± 2.7 GPa. In addition, the compression parallel to the grain was between 28 ± 3.2 MPa and 43 ± 2.4 MPa, and the compression perpendicular to the grain was between 13 ± 0.7 MPa and 19 ± 1.1 MPa. The shear strength parallel to the grain was between 10 ± 0.3 MPa and 14 ± 0.6 MPa. The cleavage and hardness were from 4.7 ± 1.6 N to 7.4 ± 0.9 N and from 3.6 ± 0.3 kN to 6.2 ± 0.6 kN, respectively. The toughness and nail withdrawal were from 27.3 ± 3.5 kN·mm^–1 to 50.5 ± 1.0 kN·mm^–1 and from 28.56 ± 4.1 N·mm^–1 to 34.52 ± 2.8 N·mm^–1, respectively. Eucalyptus clone K7 had lower MOR and other mechanical properties than clones K58 and K62 except MOE. When DBH increased, the mechanical and physical property values increased as well. This happened for all clones, and especially when DBH was over 200 mm. The results of this study showed that log characteristics, such as taper, slenderness, and crookedness, should be used for log grading standards and that each fast-growing eucalyptus clone could be applied to different product classes.

Owing to its role in mitigating CO₂ in the atmosphere, the total organic carbon (TOC) stock of soil, a key component of the terrestrial carbon cycle, is of significant interest as regards climate change. To determine TOC stock, it is first necessary to determine the soil's bulk density (BD), determined through intact soil sampling; however, in forest soils, it can be difficult to determine BD in soils with high levels of stoniness and/or tree root coverage. Furthermore, the method is time-consuming and labour-intensive, making it impractical for studies over large areas. In such cases, BD can be determined using a pedotransfer function (PTF) expressing the relationship between forest soil TOC and BD. The aim of this study was to determine a forest soil PTF using actual data obtained from 777 soil pits dug as part of the Czech Republic's National Forest Inventory (NFI). Within the NFI, BD is assessed from undisturbed core samples, while TOC is assessed from mixed samples from the same soil genetic horizons. Both generalised linear (GLM) and generalised linear mixed-effects (GLMER) models were used, with the final GLMER model best expressing the relationship for individual natural forest areas within the NFI dataset. The GLMER-based PTF described in this study can be widely applied to accurately estimate soil BD via TOC concentration at temperate forest sites where stoniness and/or root cover previously made it technically impossible to take undisturbed samples using standard methods.

Long-term human activities substantially altered floodplain regions of temperate Europe. Forest management and extensive changes in hydrology greatly affected natural floodplain soil properties, in which microbes play key roles. This study aims to assess the effects of human activities through a gradient of forest management intensity on soil microbial community (SMC), its biomass, activity, and structure. Soil chemical and physical-chemical properties were used to explain the general associations and within-site variation using principal component analysis (PCA), linear regression (LR) and linear mixed-effect regression (LMER) models. It was found that forest management application, regardless of its intensity, led to significant microbial biomass reduction. PCA revealed that microbial biomass, expressed as a sum of phospholipid fatty acids along with recalcitrant carbon fraction (ROC) best explained the variability in data. LR and LMER highlighted that bacteria are affected by floodplain forest management more than fungi, and that bacterial response to pH was highly diversified. Also, pH was identified as the best predictor of SMC structure and activity but not of its size. The study calls for further investigation in SMC interactions with ROC, soil-available Fe and Mn, and the role of redox-active metals in soil organic carbon degradation.

The lowering of loads at gradual tree felling is the riskiest activity performed by tree climbers. During this activity, great forces emerge and act on the felled tree, while the tree climbers use the tree itself to anchor and secure their stance. This research aims to find out whether certain methods of work or the use of certain rigging for lowering loads exhibit positive features in reducing the forces acting on the anchoring point of the rigging system. The work methodology consists of three operations: (i) the calculation of the coefficient of shear friction for the combination of 4 ropes and 5 lowering devices – altogether 20 combinations; (ii) the mathematical modelling of the maximum forces acting on the lowering loads of known weight; and (iii) the verification of mathematical modelling using a series of measured experiments of lowering loads of known weight. The research results present the calculation of the shear friction coefficient for 20 combinations of rigging rope and lowering devices. The maximum magnitudes of the forces which may act on the upper anchoring point of the rigging system at the known load weight were additionally calculated. A total of 240 force values were measured when a load of 12 kg in weight falls according to a predetermined model situation. The results indicate that the greatest influence on decreasing the impact force generated by the falling load is that of the load attachment, reduced load weight, shortened length of the fall or elongation of the total rope length in the rigging system. The differences in the coefficients of shear friction are apparent in the results of measurements, too.

Forest transformation commonly occurs in subtropical areas due to extensive human disturbance. However, we know little about how forest transformation may affect the soil water-holding capacity. Here, we evaluated the effects of forest transformation from natural forests to secondary forests, Castanopsis carlesii plantations, and Cunninghamia lanceolata plantations on the soil water-holding capacity, including the soil water content (SWC), maximum water holding rate (R_t), capillary holding rate (R_c), and non-capillary water holding rate (R_n), and assessed the influences of soil properties and stand characteristics on the forest transformation effects. The results showed that (i) the soil water-holding capacity in secondary forests increased significantly (SWC: 27.3%; R_t: 50.9%; R_c: 36.9%; R_n: 14.0%), but decreased in the Cunninghamia lanceolata plantations (SWC: 24.6%; R_t: 47.0%; R_c: 34.0%; R_n: 13.0%), compared to the nature forests (SWC: 26.0%; R_t: 48.3%; R_c: 34.9%; R_n: 13.4%); (ii) the soil water-holding capacity was positively correlated with the soil porosity, soil total nitrogen concentration, stand density, but negatively influenced by the soil bulk density and diameter at breast height (DBH); and (iii) the stand density, DBH and litterfall amount were the major factors regulating the soil water-holding capacity after the forest transformation. Overall, these results indicated that the soil water-holding capacity would be strongly altered by the forest transformation, but it depends on the soil properties before the transformation and the characteristics of the transformed forests. Our findings will help to better understand the functions of forests in water source conservation under the pressures of human disturbances and environmental changes.

Developing natural herbicides offers a potential solution to mitigate the drawbacks associated with synthetic pesticides used in an excessive quantity to safeguard agricultural crops. In this study, essential oils extracted via hydrodistillation from Pinus ponderosa needles were investigated for their chemical composition and phytotoxic activity. Gas chromatography with mass spectrometry detection (GC/MS) identified twenty-three constituents, constituting 93.87% of the total oil. The predominant components were oxygenated monoterpenes (64.66%), with α-pinene (37.78%), β-pinene (24.32%), and sesquiterpenes hydrocarbons, particularly germacrene-D (7.26%). The phytotoxic effects of P. ponderosa essential oil were tested on Phalaris canariensis L., Trifolium campestre Schreb., and Sinapis arvensis L. The essential oil exhibited a significant inhibitory effect on seed germination and seedling growth in a dose-dependent manner. A low concentration of essential oil reduced the germination and seedling growth of all tested weeds. Additionally, the essential oil treatment impacted malondialdehyde content and electrolyte leakage in the seedlings. These preliminary findings suggest that essential oils from forest trees, particularly Pinus ponderosa, could serve as an eco-friendly alternative to chemical herbicides. This approach may contribute to addressing the challenges associated with synthetic pesticides while promoting sustainable and environmentally friendly agricultural practices.

The mechanical scarification of acorns, although requiring a significant investment of resources, is a process commonly used in container nurseries for seed preparation. Its aim is to increase the number of germinating seeds and to shorten and equalise the length of their germination period. Research results indicate that scarification also affects the production of seedlings with improved biometric parameters. However, there is limited information available on improving the structure of the root system, primarily due to the limited availability of image analysis systems for these plant parts. This study employed modern measurement methods using WinRhizo and WinFolia software (Regent Instruments Inc.; Version Pro, 2022) to comparatively analyse root system parameters, focusing mainly on their structure. The parameters of pedunculate oak (Quercus robur L.) seedlings grown in polystyrene containers were compared with and without mechanical scarification, achieved by manually cutting off part of the acorn. After the end of the growing season, the parameters of all analysed seedlings (200 pieces) were determined, and a detailed analysis of the root system was performed on selected average individuals (64 pieces). Scarification resulted in an increase in the number of germinated seeds and grown seedlings, as well as an increase in the height and diameter of the root collar and a reduction in the variation of the obtained seedlings' parameters. Seedlings grown from scarified seeds were also characterised by a greater number of leaves with larger unit mass, which had smaller dimensions. The root system of seedlings grown from scarified seeds exhibited a higher average diameter and total volume of roots, as well as greater total length, surface area, and volume of fine roots, i.e. in the diameter range: 0.5 < D ≤ 2.0 mm. The obtained results confirmed the positive effect of seed scarification on germination and emergence efficiency, as well as on biometric features and the quality of the grown seedlings.

Dragon trees, arborescent members of the genus Dracaena (Asparagaceae), provide a wide range of ecosystem services and have been ethnobotanically important plants since ancient times. Currently, their relictual distribution is fragmented, populations are isolated and often under threat. We provide a brief overview of scientific studies and the state of knowledge on dragon trees published since 2020, when the last review was published. More than 120 papers dealing with dragon trees have appeared, indicating a significant interest in their research, cultural uses and conservation. The most intensively investigated species are Dracaena cochinchinensis, D. cinnabari, D. draco and D. cambodiana. Almost half of the papers deal with the chemical composition of resin and its bioactivity, in addition to studies on ecology, conservation and genetics. Only a few studies are devoted to taxonomy and ethnobotany.

An unprecedented bark beetle outbreak has led to a significant decline in forest cover in Central Europe in the last 10 years, affecting an area estimated at more than 200 000 ha in the Czech Republic. Among the many ecological threats associated with extensive clearings, the potential alteration of hydrological processes is one of the most important. Therefore, after 2022, the precipitation–runoff balance in three catchments in the Jeseníky Mts. area was studied. This study focuses on the rainfall variability within the area, which was measured using 24 rain gauges deployed to cover different altitudes as well as the geographical exposures of the mountain catchments. Precipitation data was evaluated based on seven-day totals within the frost-free period. There was a significant increase in precipitation with altitude (12% increase for every 100 m a.s.l.) but only in less than half (48.7%) of the evaluated periods. No significant trend was demonstrated in the remaining periods, and a negative trend in precipitation with altitude was identified in 8.9% of cases. Additionally, the role of exposure was insignificant, although a tendency towards slightly lower precipitation was found for the eastern exposure at altitudes up to 1 000 m a.s.l., which may be related to the prevailing wind direction. We concluded that even a relatively dense monitoring network is not necessarily sufficient to provide accurate precipitation data in forested catchments, especially in mountain areas. Under such conditions, the use of complex models that also use radar data is recommended.

This article presents guidelines for assessing the optimal dimensions of forest road pipe culverts, based on input of actual and experimental data to standard engineering techniques. In doing so, we assess the need for (i) changes in the parametrisation of inputs (i.e. culvert micro-catchment dimensions, rainfall and resultant culvert flow, and culvert flow rates during culvert hydraulic dimensioning), and (ii) the need to redesign culvert outlets in relation to flow speed. Our results demonstrate that values for most inputs presently used under current technical practice for forest road pipe culvert sizing are significantly higher than those achieved under experimental conditions. The data on outlet flow velocities strongly suggests that strengthening of culvert outlet aprons will be crucial for their future operation.

Global climate change (GCC) is putting increasing pressure on forest ecosystems, leading to more frequent disturbances such as pest outbreaks and other climate-related stressors, all of which threaten forest stability. This study examines how different technical water retention measures (infiltration pits) can enhance the resilience of European beech (Fagus sylvatica L.) to these climatic challenges, focusing on their impact on radial growth, sap flow, and acclimatisation to moisture conditions at two sites in Czechia (430–440 m a.s.l.). Three treatments were compared: a water infiltration pit under a culvert mouth, an infiltration pit without a culvert and a control plot without a technical solution. Results showed that maximum daily transpiration rates of beech ranged between 90–120 L per day. Air temperature had a stronger influence on beech radial growth than precipitation, particularly at the waterlogged sites. The lowest radial growth occurred in the treatment involving a water infiltration pit under a culvert mouth, while treatments with an infiltration pit without a culvert demonstrated notable seasonal stem shrinkage and swelling (tree water deficit – TWD), especially in early spring. On the other hand, no differences were found between the three treatments including the control variant in the maximum growth or the context of minimum TWD. In conclusion, these technical measures had limited or short-term effects on the growth and physiological processes of European beech. Despite the high costs of implementation, sap flow and dendrochronological measurements do not support the construction of infiltration pits as a means of improving water retention in forest ecosystems.

A root detector is a non-destructive technology developed to indicate the radial distribution of tree roots, which are not often visible on the surface. This study aims to assess the accuracy of the root detector in estimating the radial distribution of both exposed and buried tree roots. Six Agathis loranthifolia Salisb. trees were selected, three with exposed roots and three with buried roots. The Fakopp® root detector, an acoustic-based tool, was used in this study. Root estimation was based on a combination of threshold values (> 400 m·s^–1), average values, and the peak of the sound wave velocity. Soil excavation was manually conducted at a depth of 30 cm within a 100 cm radius of the tree trunk. The results showed that under similar soil conditions, the root detector achieved an accuracy of over 80% in detecting the actual radial root distribution, as validated by the excavation method. Root diameter exhibited the strongest correlation with sound velocity in detecting lateral roots. However, root depth and inclination angle contributed to detection inaccuracies in estimating the radial distribution of lateral roots.

Soil degradation resulting from illicit coca cultivation and unsustainable grazing practices poses a major challenge to ecosystem restoration in the Peruvian Amazon. This study evaluates the potential of fast-growing tree species to rehabilitate degraded soils while producing economically valuable timber. Monoculture plantations of Corymbia torelliana (eucalyptus), Calycophyllum spruceanum (capirona), Colubrina glandulosa (shaina), and Cedrelinga cateniformis (tornillo) were established on former coca and pasture lands in the Alto Huallaga Valley. We assessed tree growth and key soil physicochemical properties – including soil organic matter (SOM), bulk density (BD), pH, extractable phosphorus (P), and cation exchange capacity (CEC) – in topsoil (0–10 cm) and subsoil (10–40 cm) layers. Eucalyptus and tornillo showed the highest diameter growth, while tornillo plots had significantly higher SOM levels. Soil pH was strongly acidic across all plots, and subsoil P was lowest under tornillo. CEC was highest in eucalyptus and capirona plots. Our findings suggest that tree plantations, particularly with eucalyptus, capirona, and tornillo, represent a viable strategy for the sustainable use and rehabilitation of soils formerly used for coca cultivation and grazing.

The paper deals with the assessment of the influence of the length of cold stratification period on the germination parameters of seeds of wild service tree [Sorbus torminalis (L.) Crantz]. The germination tests (4 × 100 seeds) were conducted in two runs in 2020 and 2021; they were performed for three seed lots and three cold stratification periods (two, three and four months) before the testing of germination in each run. The values of germination energy and germination capacity were assessed, and the germination rate was computed. The results showed that the two-month cold stratification period has not been sufficient to overcome the dormancy of tested seeds. Regardless of the year in which the tests were conducted, seeds stratified for two months showed almost zero germination. For seeds treated with three- and four-month cold stratification, the germination percentage varied from ca. 5% to 32% and from ca. 13% to 46%, respectively. Our results basically correspond with findings reported in the reviewed literature. In 2020, the seeds subjected to four-month stratification performed significantly better than the seeds subjected to three-month stratification. However, in 2021, the seeds stratified for three months reached slightly better results. Four-month stratification also led to an increased percentage of prematurely germinated seeds during stratification. To conclude, the two-month period of cold stratification proved to be insufficient and at least three months of cold stratification are needed to obtain the adequate germination of seeds in subsequent laboratory tests.

The increasing global demand for energy and the negative environmental impacts of fossil fuel exploitation have driven interest in sustainable energy solutions, such as wood. The Russian Federation, as one of the world's largest pellet producers, has an opportunity to utilise pellets domestically. This study addresses the lack of publicly available life cycle assessment (LCA) studies on pellet production and utilisation in Russia, specifically examining the environmental impact of residential heat production from locally produced wood pellets. Utilising primary data from the Northwest region, the study follows ISO 14040 and 14044 standards and employs the ReCiPe 2016 (H) Midpoint v. 1.1 method to assess environmental impacts. The results indicate that the production of pellets is the dominant contributor to the global warming impact category, marine eutrophication, and fossil resource scarcity, while transportation has the least impact across all categories. Sensitivity analyses confirm the robustness of these findings, revealing that using natural gas for pellet drying increases emissions for global warming and fossil resource scarcity, and increasing transportation distance significantly raises emissions across all categories. The findings provide valuable insights for policymakers and stakeholders aiming to enhance the sustainability of similar bioenergy systems.

Corrigendum in: J. For. Sci. 2026 Feb 27;72(2):106. doi: 10.17221/16/2026-JFS

The response of forest trees to bark beetle attack involves substantial changes in terpene content, which varies between resistant and non-resistant species. Terpenes serve as crucial chemical defences against pests, and their production can be influenced by prior attack history, water stress, and biotic interactions. Moreover, the effectiveness of terpenes in resisting bark beetle attack is influenced by their chemical composition. Different tree species produce different types and amounts of terpenes that can affect their overall resistance levels. In conifers, acyclic and cyclic monoterpenes and sesquiterpenes were significantly present in all samples. Acyclic monoterpenes, ketones, aldehydes, monocarboxylic acids and their esters, and aromatic and cyclic compounds have been identified in beech. A statistically significant decrease of compounds in infested trees was determined in pine (cis-β-ocimene, neo-allo-ocimene, terpinene-4-ol, and δ-cadinene), and fir (acetophenone, benzonitrile, phenol, and zonarene). In addition, increased benzaldehyde production was observed. However, in infested beech trees, only increased production of some aliphatic and aromatic compounds (2-butanone and 3,5-octadien-2-one, 2-methyl-4-pentenal and 2,4-hexadienal, octanoic acid, nonanoic acid, 3,4-dimethyl-2,5-furandione, acetophenone, benzeneacetaldehyde, 2-ethyl-1H-pyrrole, β-ionone-5,6-epoxide, β-cyclocitral, and geranyl acetone) was found. We investigated the changes in the terpene composition of surviving trees in bark beetle-infested stands of beech (Fagus sylvatica), pine (Pinus sylvestris), and fir (Abies alba). Our data showed that the distribution of different groups of volatile compounds varied according to the tree species.