J. For. Sci., 2019, 65(3):96-105 | DOI: 10.17221/93/2018-JFS

Effect of fungal degradation on physicochemical properties of exploited stumps of oriental beech over a 25-year felling period and the obtained Kraft pulp propertiesOriginal Paper

Yasin Rahmati1, Kazem Nourmohammadi2, Reza Naghdi*,3, Davoud Kartoolinejad4
1 Department of Engineering of Wood and Paper Industries, Faculty of Natural Resources, Tarbiat Modares University, Nour, Iran
2 Young Researchers and Elite Club, Khorramabad Branch, Islamic Azad University, Khorramabad, Iran
3 Department of Engineering of Wood and Paper Industries, Faculty of Natural Resources, Semnan University, Semnan, Iran
4 Department of Arid Land Forestry, Faculty of Desert Studies, Semnan University, Semnan, Iran *Corresponding e-mail: reza_naghdi@semnan.ac.ir

Oriental beech (Fagus orientalis Lipsky) is the most important and valuable industrial wood species in the Hyrcanian forests in the north of Iran mainly used for furniture, veneer, composite, and papermaking industries. The present research was conducted in 2014 aimed at investigating the physicochemical changes of the felled oriental beech stumps over a 2-25 year period, and likewise the feasibility of using the given stumps as an alternative resource for wood pulp production. To do so, the effects of in-situ decay of beech stumps on their physical (wet and dry weights of wood, wet apparent density, and dry apparent density) and chemical (cellulose, hemicellulose, lignin, extractives, and total mass of carbohydrates) properties over a 2-25 year felling period were studied. The effects of the given decay period were also studied on the obtained Kraft pulp yield and Kappa number. The results indicate that the wet and dry apparent densities as well as the wet and dry weights of the wood samples decreased over the study period. Also, the results show that approximately 30% of the total mass of carbohydrates was degraded by the ambient fungi over the initial two years of felling, whereas the same property was reduced by 60% after 25 years. The Kraft pulp yields obtained from 2- and 25-year decayed stumps were 22.5% and 8.4%, respectively. The fungal degradation of wood chemical compounds could considerably reduce pulp yield and Kappa number by 62.8% and 74.2%, respectively. The results of a stepwise multivariate regression model evidence that cellulose not only affects the Kappa number but also owns a greater share (vs. lignin) in modelling the Kappa number. This reveals that the intensity of cellulose degradation, due to fungal exposure, is significantly higher than that of the other components of beech stumps in the studied forest area.

Keywords: Beech wood; decayed stumps; wood density; weight; chemical compounds; white rot fungi

Published: March 31, 2019  Show citation

ACS AIP APA ASA Harvard Chicago Chicago Notes IEEE ISO690 MLA NLM Turabian Vancouver
Rahmati Y, Nourmohammadi K, Naghdi R, Kartoolinejad D. Effect of fungal degradation on physicochemical properties of exploited stumps of oriental beech over a 25-year felling period and the obtained Kraft pulp properties. J. For. Sci. 2019;65(3):96-105. doi: 10.17221/93/2018-JFS.
Download citation

References

  1. Abdollahpoor A., Terazinia Sh. (2002): Chemical Analysis of Industrial Wood and Bark of Two Species of Beech and Spruce. [MSc Thesis.] Teheran, Tehran University: 148. (in Persian)
  2. Akgul M., Tozluoglu A. (2009): Some chemical and morphological properties of juvenile woods from beech (Fagus orientalis L.) and pine (Pinus nigra A.) plantations. Trends in Applied Sciences Research, 4: 116-125. Go to original source...
  3. Bari E., Mohebby B., Naji H.R., Oladi R., Yilgor N., Nazarnezhad N., Ohno K.M., Nicholas D.D. (2018): Monitoring the cell wall characteristics of degraded beech wood by white-rot fungi: Anatomical, chemical, and photochemical study. Maderas, Ciencia y tecnología, 20: 35-56. Go to original source...
  4. Bari E., Schmidt O., Oladi R. (2015): A histological investigation of oriental beech wood decayed by Pleurotus ostreatus and Trametes versicolor. Forest Pathology, 45: 349-357. Go to original source...
  5. Bari E., Taghiyari H.R., Mohebby B., Clausen C.A., Schmidt O., Ghanbary M.A.T., Vaseghi M.J. (2015): Mechanical properties and chemical composition of beech wood exposed for 30 and 120 days to white-rot fungi. Holzforschung, 69: 587-593. Go to original source...
  6. Bektaş İ., Güler C., Baştürk M.A. (2002): Principal mechanical properties of Eastern beech wood (Fagus orientalis Lipsky) naturally grown in Andirin Northeastern Mediterranean region of Turkey. Turkish Journal of Agriculture and Forestry, 26: 147-154.
  7. Christensen O. (1984): The states of decay of woody litter determined by relative density. Oikos, 42: 211-219. Go to original source...
  8. Colagar A.H., Yousefzadeh H., Shayanmehr F., Jalali S.G., Zare H., Tippery N.P. (2016): Molecular taxonomy of Hyrcanian Alnus using nuclear ribosomal ITS and chloroplast trnH-psbA DNA barcode markers. Systematics and Biodiversity, 14: 88-101. Go to original source...
  9. Fonseca M.I., Fariña J.I., Castrillo M.L., Rodríguez M.D., Nuñez C.E., Villalba L.L., Zapata P.D. (2014): Biopulping of wood chips with Phlebia brevispora BAFC 633 reduces lignin content and improves pulp quality. International Biodeterioration & Biodegradation, 90: 29-35. Go to original source...
  10. Harmon M.E. (2001): Moving towards a new paradigm for woody detritus management. Ecological Bulletins, 49: 269-278.
  11. Kartoolinejad D., Najafi A., Kazemi-Najafi S. (2017): Long-term impacts of ground skidding on standing trees: assessment of decay using stress waves. Environmental Engineering and Management Journal, 16: 2283-2291. Go to original source...
  12. Kubicek C.P. (2013): Fungi and Lignocellulosic Biomass. Chichester, John Wiley & Sons: 304. Go to original source...
  13. Li Q., Wang X.X., Lin J.G., Liu J., Jiang M.S., Chu L.X. (2014): Chemical and antifungal activity of extracts from the xylem of Cinnamomum camphora. Biological Research, 9: 2560-2571. Go to original source...
  14. Li Z., Li-min D., Hui-Yan G., Lei Z. (2007): Review on the decomposition and influence factor of coarse woody debris in forest ecosystem. Journal of Forest Research, 18: 48-54. Go to original source...
  15. Liu Q.M., Luo Y.S., Wang H., Peng W.X., Wu Y.Q., Zhang D.Q., Ma Q.Z. (2008): Determination of chemical components of benzene/ethanol extractive of beech wood by GC/ MS. Bioinformatics and Biomedical Engineering ICBBE. In: The 2nd International Conference, Shangha, date of conference, 2776-2779. Go to original source...
  16. Nadali E., Karimi A.N., Tajvidi M., Naghdi R. (2010): Natural durability of a bagasse fiber/ polypropylene composite exposed to rainbow fungus (Coriolus versicolor). Journal of Reinforced Plastics and Composites, 29: 1028-1037. Go to original source...
  17. Nadali E., Layeghi M., Ebrahimi G., Naghdi R., Jonoobi M., Khorasani M.M., Mirbagheri Y. (2018): Effects of multiple extrusions on structure-property performance of natural fibre high-density polyethylene biocomposites. Materials Research, 21: e20170301, http://dx.doi.org/10.1590/1980-5373-mr-2017-0301. Go to original source...
  18. Naghdi R., Hosseini S.Z., Resalati H. (2008): Evaluation of paper properties obtained from maple juvenile wood through Kraft pulping process. Iranian Journal of Natural Resources, 60: 1465-1472. (In Persian)
  19. Naghdi R., Karimi A.N., Jahan Latibari A., Hamzeh Y., Mirshokraie S.A., Nadali E. (2013): Biological removal of chloro-organic compounds from bagasse soda pulp bleaching effluent by Coriolus versicolor. Global Nest Journal, 15: 29-36. Go to original source...
  20. Nevalainen H. (2017): Editorial Current Advances in Fungal Biotechnology (Part I). Current Biotechnology, 6: 77-77. Go to original source...
  21. Nourmohammadi K., Rahimi D., Naghdi R., Kartoolinejad D. (2016): Effects of physical and chemical treatments of seed dormancy breaking on seedling quality index (QI) of Caspian locust (Gleditsia caspica Desf.). Austrian Journal of Forest Science, 133: 157-171.
  22. Papadopoulos A.N. (2008): The effect of acetylation on bending strength of finger jointed beech wood (Fagus sylvatica L.). European Journal of Wood and Wood Products, 66: 309-310. Go to original source...
  23. Sablík P., Giagli K., Pařil P., Baar J., Rademacher P. (2016): Impact of extractive chemical compounds from durable wood species on fungal decay after impregnation of nondurable wood species. Holz als Roh-und Werkstoff, 2: 231-236. Go to original source...
  24. Shayanmehr F., Jalali S., Hosseinzadeh Colagar A., Yousefzadeh H., Zare H. (2015): Pollen morphology of the genus Alnus Mill. in Hyrcanian forests, North of Iran. Applied Ecology and Environmental Research, 13: 833-847. Go to original source...
  25. Silva N.F.D.S., Simões M.R., Knob A., De Moraes S.S., Henn C., Da ConceiçãO Silva J.L., Kadowaki M.K. (2016): Improvement in the bleaching of kraft pulp with xylanase from Penicillium crustosum FP 11 isolated from the Atlantic forest. Biocatalysis and Biotransformation, 34: 119-127. Go to original source...
  26. Singh A.P. (2012): A review of microbial decay types found in wooden objects of cultural heritage recovered from buried and waterlogged environments. Journal of Cultural Heritage, 13: S16-S20. Go to original source...
  27. Singh A.P., Singh T. (2014): Biotechnological applications of wood-rotting fungi: A review. Biomass and Bioenergy, 62: 198-206. Go to original source...
  28. Tappi standard (1997): T 17. wd-97, Cellulose in wood.
  29. Tappi standard (1998): T-222. om-98, Standard methods for acid-insoluble lignin in wood and pulp.
  30. Tavares A.P.M., Pereira S.R., Xavier A.M.R.B. (2017): Biotechnological Applications of Trametes versicolor and their Enzymes. Current Biotechnology, 6: 78-88. Go to original source...
  31. Timell T.E. (1967): Recent progress in the chemistry of wood hemicelluloses. Wood Science and Technology, 1: 45-70. Go to original source...
  32. Tomak E.D. (2014): Changes in chemical composition of decayed Scots pine and beech wood. Science and Engineering of Composite Materials, 21: 589-595. Go to original source...
  33. Valette N., Perrot T., Sormani R., Gelhaye E., MorelRouhier M. (2017): Antifungal activities of wood extractives. Fungal Biology Reviews, 31: 113-123. Go to original source...
  34. Virk A.P., Sharma P., Capalash N. (2012): Use of laccase in pulp and paper industry. Biotechnology Progress, 28: 21-32. Go to original source... Go to PubMed...
  35. Woldesenbet F., Virk A.P., Gupta N., Sharma P. (2017): Biobleaching of mixed wood kraft pulp with alkalophilic bacterial xylanase, mannanase and laccase-mediator system. Journal of Microbiology and Biotechnology Research, 3: 32-41.
  36. Woodcock D.W., Shier A.D. (2003): Does canopy position affect wood specific gravity in temperate forest trees? Annals of Botany, 91: 529-537. Go to original source... Go to PubMed...
  37. Yang B., Wyman C.E. (2004): Effect of xylan and lignin removal by batch and flow through pretreatment on the enzymatic digestibility of corn stover cellulose. Biotechnology and Bioengineering, 86: 88-95. Go to original source... Go to PubMed...
  38. Yang F.F., Li Y.L., Zhou G.Y., Wenigmann K.O., Zhang D.Q., Wenigmann M., Liu S.Z., Zhang Q.M. (2010): Dynamics of coarse woody debris and decomposition rate in an old-growth forest in lower tropical China. Forest Ecology and Management, 259: 1666-1672. Go to original source...

This is an open access article distributed under the terms of the Creative Commons Attribution-NonCommercial 4.0 International (CC BY NC 4.0), which permits non-comercial use, distribution, and reproduction in any medium, provided the original publication is properly cited. No use, distribution or reproduction is permitted which does not comply with these terms.